Product ID: IDL.125x4x60
Enlarge Photo

Idealshield Sleeves to fit 4.5″ OD 4″ sch pipeIDL.125x4x60

Usually Ships in 1 to 2 Business Days
For freight quotes,
call us at 425-336-2711
Clear
Write A Review

Ideal Shield Bollard Covers

Ideal Shield bollard covers offer superior protection for posts of all sizes both indoor and outdoor. With these domed top bollards, you’ll enhance the visibility of your posts and reduce the amount of maintenance needed to keep them looking attractive for years to come.

Install Ideal Shield Post Sleeves in Minutes

With Ideal Shield’s patented install method it’s easy to add post sleeves in just a few minutes. Once you’ve determined the diameter and height needed, your Ideal Shield post guard should fit snugly over the existing bollard.

The first step is to apply the two strips of installation tape (included in order) to the bollard. Remove the adhesive backing from one strip and wrap it about 6″” down from the top of the bollard, being careful to leave a gap rather than connecting the strip end to end. Air will need to rush through the gap when the post cover is put on. Next remove the adhesive backing from the second strip and wrap it completely around the bollard about 6″-8″” from the bottom.

Finally, take your Ideal Shield bollard cover and slip it over the post. It should smoothly glide over the post and remain firmly in place.

Ideal Shield Post Guard Materials and Finishes

Ideal Shield uses durable 1/8″” thick low-density polyethylene thermoplastic to construct their post sleeves. They come in a variety of diameters and can be cut to fit the exact height of existing bollards.

You can choose from a wide selection of colors to match the surrounding environment or to ensure the best visibility. Ideal Shield post guards are available with or without reflective tape for even better visibility at all hours of the day.

All ideal shield post sleeves found at Bollard Pros are proudly manufactured in the USA.

Ideal Shield features:

  • 1/8″ nominal thick low-density polyethylene thermoplastic (LDPE).
  • Available diameters: 4″ 6″ and 8″ with a .125″ thick thin wall. All sizes plus 3″ and 5″ covers are available in .25″ thick wall for heavy duty cover applications.
  • Can be cut to custom heights.
  • Installation tape included.
  • Available colors: yellow, red, blue, white, green, gray, black, brown, and orange.
  • Available with or without reflective tape.
  • Made with UV antistatic additives.
  • Great for lower traffic areas.

*THIS ITEM NOT AVAILABLE FOR WILL CALL, PLEASE CALL FOR SHIPPING QUOTE.

Be the first to review this product!
© Copyright 2019 Bollard Pros. All Rights Reserved.
VisaMastercardAmexDiscoverJCBDiners